Encircling Coil Test System – Ndt Instruments https://www.ndt-instruments.com Tue, 21 Nov 2023 06:28:51 +0000 en-US hourly 1 https://wordpress.org/?v=6.5.7 Sensor System T60 https://www.ndt-instruments.com/product/sensor-system-t60/ Mon, 22 Jan 2018 10:49:41 +0000 https://www.ndt-instruments.com/?post_type=product&p=650 A rugged sensor system for use on hot-rolling lines with temperatures up to 1200 degree C and rolling speeds up to 150 m/sec. Water-cooled coils and guides for material with …

Continue reading "Sensor System T60"

The post Sensor System T60 appeared first on Ndt Instruments.

]]> A rugged sensor system for use on hot-rolling lines with temperatures up to 1200 degree C and rolling speeds up to 150 m/sec. Water-cooled coils and guides for material with diameters ranging from 5 to 60 mm are available. Special guide elements steady the wire and ensure that it is guided as centrally as possible.

The post Sensor System T60 appeared first on Ndt Instruments.

]]> Sensor System FD https://www.ndt-instruments.com/product/sensor-system-fd/ Mon, 22 Jan 2018 10:48:40 +0000 https://www.ndt-instruments.com/?post_type=product&p=648 A fine wire sensor system is used for testing tungsten and molybdenum wire for the lamp industry in the diameter range 0.1  to 2 mm. Special-purpose, small coils with differential …

Continue reading "Sensor System FD"

The post Sensor System FD appeared first on Ndt Instruments.

]]> A fine wire sensor system is used for testing tungsten and molybdenum wire for the lamp industry in the diameter range 0.1  to 2 mm. Special-purpose, small coils with differential and absolute winding and nozzles in addition to guide elements are adapted to this applicatio

The post Sensor System FD appeared first on Ndt Instruments.

]]> Sensor System M40/M90/M140/M170 https://www.ndt-instruments.com/product/sensor-system-m40-m90-m140-m170/ Mon, 22 Jan 2018 10:47:40 +0000 https://www.ndt-instruments.com/?post_type=product&p=646 Magnetization yokes for testing ferromagnetic material. In general circumferential coils are used. Size-adapted steel guides which simultaneously protect the coil are used for magnetization. Segment coils can also be used. …

Continue reading "Sensor System M40/M90/M140/M170"

The post Sensor System M40/M90/M140/M170 appeared first on Ndt Instruments.

]]> Magnetization yokes for testing ferromagnetic material. In general circumferential coils are used. Size-adapted steel guides which simultaneously protect the coil are used for magnetization. Segment coils can also be used. The yokes are operated with a yoke current box.

The post Sensor System M40/M90/M140/M170 appeared first on Ndt Instruments.

]]> Sensor System H40/H90 https://www.ndt-instruments.com/product/sensor-system-h40-h90/ Mon, 22 Jan 2018 10:46:25 +0000 https://www.ndt-instruments.com/?post_type=product&p=644 Coil holder for circumferential testing of non-ferrous metals in the diameter range 0.2 mm to 90 mm.

The post Sensor System H40/H90 appeared first on Ndt Instruments.

]]> Coil holder for circumferential testing of non-ferrous metals in the diameter range 0.2 mm to 90 mm.

The post Sensor System H40/H90 appeared first on Ndt Instruments.

]]> Sensor System P12/P40 https://www.ndt-instruments.com/product/sensor-system-p12-p40/ Mon, 22 Jan 2018 10:45:33 +0000 https://www.ndt-instruments.com/?post_type=product&p=642 The module for eddy-current testing with through-type coils reduced to the essentials. Extremely easy operating controls, uni-dimensional signal display as LED bar graph, Yes/No sorting. Easy integration in existing control …

Continue reading "Sensor System P12/P40"

The post Sensor System P12/P40 appeared first on Ndt Instruments.

]]> The module for eddy-current testing with through-type coils reduced to the essentials. Extremely easy operating controls, uni-dimensional signal display as LED bar graph, Yes/No sorting. Easy integration in existing control cabinets. The testing line controller (PLC) also controls and forwards the results of the EC module for marking and sorting. Parameter setting via RS 232 interface is possible.

The post Sensor System P12/P40 appeared first on Ndt Instruments.

]]> Defectomat ECM https://www.ndt-instruments.com/product/defectomat-ecm/ Mon, 22 Jan 2018 10:44:22 +0000 https://www.ndt-instruments.com/?post_type=product&p=640 The module for eddy-current testing with through-type coils reduced to the essentials. Extremely easy operating controls, uni-dimensional signal display as LED bar graph, Yes/No sorting. Easy integration in existing control …

Continue reading "Defectomat ECM"

The post Defectomat ECM appeared first on Ndt Instruments.

]]> The module for eddy-current testing with through-type coils reduced to the essentials. Extremely easy operating controls, uni-dimensional signal display as LED bar graph, Yes/No sorting. Easy integration in existing control cabinets. The testing line controller (PLC) also controls and forwards the results of the EC module for marking and sorting. Parameter setting via RS 232 interface is possible.

The post Defectomat ECM appeared first on Ndt Instruments.

]]> Defectomat CI https://www.ndt-instruments.com/product/defectomat-ci/ Mon, 22 Jan 2018 10:43:13 +0000 https://www.ndt-instruments.com/?post_type=product&p=638 2-channel base module for almost all requirements One of the most popular eddy current test instruments in the world with an unrivaled compact design. The DEFECTOMAT CI features an operation …

Continue reading "Defectomat CI"

The post Defectomat CI appeared first on Ndt Instruments.

]]>

2-channel base module for almost all requirements

One of the most popular eddy current test instruments in the world with an unrivaled compact design. The DEFECTOMAT CI features an operation unit as well as easy “Turn and Push” operation. The evaluation electronic equipment also comes with two optional, fully operational measurement channels. It also has a filter tracking setting, excitation frequencies from 1 to 1,000 kHz, and a sector signal analysis function.

Your advantages at a glance

  • ▪  Optional full 2-channel analysis, Diff/Abs, Diff/Diff, Diff/Ferromat
  • ▪  12 excitation frequencies from 1 to 1,000 kHz
  • ▪  Filter tracking according to test speed
  • ▪  Precision marking in exact location
  • ▪  Sector signal analysis with 2 trigger levels
  • ▪  Analogue output
  • ▪  State-of-the-art computer technology
  • ▪  Full network integration
  • ▪  Quick and easy with “Turn and Push”
  • ▪  Password-protected operating level
  • ▪  Clear color display
  • ▪  Visualization of the testing process
  • ▪  Continuous display of the key test parameters

 

Technical Data

Measurement channels: Max. 2 independent channels, differential or static operation, second measurement channels optionally as FERROMAT
Testing frequencies: 1, 3, 6, 10, 12, 15, 20, 30, 60, 100, 300, 1,000 kHz – optional additional frequencies
Filtering process: manual, 12 levels, 1 Hz – 16 kHz
Amplification: max. dynamic range 102 dB
Test speed: max. 150 m/s
Sensor monitoring: disruption, short circuit, overload

The post Defectomat CI appeared first on Ndt Instruments.

]]>