• 12VDC 2.5 AMP
• FOR USE WHERE PERMANENT MAGNETS OR FULL WAVE DC FIELDS ARE PERMITTED

UW-115 Mini Underwater Contour Probe

• 115VAC 4 AMP
• OFFERS OPTIMUM RESULTS FOR SURFACE BREAKING DEFECTS

The post UW-12/UW-15 appeared first on Ndt Instruments.

The DA-200 contour probe is a portable, self-contained instrument designed to produce a magnetic field on or within ferrous-magnetic materials. The selective ac and dc functions are built into a single reliable instrument.
The ac mode produces an intense ac field for detection of surface defects and demagnetizing after inspection. The dc mode produces an intense half wave rectified dc field for detection of some sub-surface defects. Combined with the flexibility of articulating legs and a rugged molded housing, the contour probe can be used on nearly any part or surface contour… in the lab, factory, or field site.

Your magnetic particle applications need the versatility and reliable performance advantages of the parker contour probe. an industry standard with 45 years of NDT service.

The post DA 200 appeared first on Ndt Instruments.

If you do any work with ferrous metals… in the shipyard, aerospace, steel mill, foundry, weldment or vehicle overhaul… you need the performance advantage of the P-2 Contour Probe. The ergonomic, light-weight design is extremely comfortable and reduces stress on the operator. This new style allows for an excellent grip in a variety of testing conditions.

Wide versatility

Mechanically, the P-2 Probe will conform to practically any surface configuration. It produces strong, constant AC fields.

Precise Area Inspection

Powerful magnetic fields are concentrated and applied to the precise area to be inspected. The construction of the new P-2 Contour Probe allows for the replacement of all internal components.

One-Person Package

Add a Contour Probe Kit or Magnetic Inspection Accessories for a complete One-Person Package. One person takes it to work and easily performs a thorough and reliable inspection in a fraction of the time consumed by large, bulky equipment.

Features

• Handheld AC Magnetic Yoke

• New Ergonomic Grip

• Lightweight (under 5 lb)

• Durable Molded Construction

• Powerful AC Magnetic Field

• One-Year Guarantee

• Totally Repairable

• Exceeds ASTM 10 lb Weight-Lift Requirement

SPECIFICATIONS

The post P-2 Series Contour Probes appeared first on Ndt Instruments.

The B-310 PDC Mini Contour Probe a very portable, battery-operated instrument for Magnetic Particle Inspection, and is especially convenient where power is limited or where operator safety is a concern.

The B-310 PDC Magnetic Inspection Yoke is designed to perform Magnetic Particle inspections quickly and reliably, producing highly defined defect indications. The unit will comply with the 40 to 50 pound weight-lift test. The exclusive strain-relief feature allows the power cord to enter from the rear or top of the unit permitting greater access to confined work areas. The overall length of the unit is only 7.25”.

As with all Parker Contour Probes, the new B-310 PDC has fully adjustable legs permitting the DC field to be applied to the precise area of inspection. The rugged body assembly is injection molded of the same durable material used in heavy duty power tools. It is shaped to fit the hand comfortably to reduce operator fatigue.

The model B-310 PDC may be ordered with a convenient 12V, foam-padded battery pack with belt loops and shoulder strap. Batteries are available in either 7.2 or 14.4 amp hour size and the pack includes a battery charger. The batteries are good for 150 to 1500 recharges depending on the amount you discharge the battery and storage conditions.

The B-310 PDC comes with a 10 foot cord and can be plugged into any 12V automotive cigarette lighter socket.

The post B-310PDC Battery Operated Contour Probe appeared first on Ndt Instruments.

DA-400 Contour Probe

The DA-400 Contour Probe is a portable, self-contained instrument designed to produce a magnetic field on or within ferro-magnetic materials.

– Versatility and powerful performance in a lightweight (8 lbs.) instrument
– Constant AC or pulsed DC fields with the flip of a switch for the location of surface and some sub-surface defects
– Apply continuous or residual magnetic fields and demagnetize too
– Use with dry powder, wet fluorescent or visible
– High impact molded housing
– One year repair/replacement guarantee
– Optional Y-400 Yoke Light where shown is available at additional cost

The selective AC and pulsed DC functions are built into a single reliable instrument. The AC mode produces an intense AC field for detection of surface defects and demagnetizing after inspection. The DC mode produces an intense pulsed DC field for detection of some subsurface defects.

Controls and solid-state electronics are contained within the high impact molded housing. Articulating legs allow the AC or DC field to be applied to the precise area of inspection on nearly any part of the surface shape… in the lab, factory or field site.

All Parker Contour Probes comply with the requirements of applicable specifications. Certified for European CE requirements.

The post DA-400 Series Contour Probes appeared first on Ndt Instruments.

Order Yoke set separately or with the complete kit which includes: plastic carrying case, one pound of red and gray dry inspection powder and the PB-1 Powder applicator.

The post PM-50 appeared first on Ndt Instruments.

PORTABLE MAGNETIZING COILS

Parker’s new portable magnetizing coils are designed for magnetic particle inspection of ferrous metal parts. The new coils allow for the use of either dry powder or wet fluorescent inspection media and may be used for demagnetizing as well.

The coils are molded in a tough black polyurethane material and comes equipped with a foot switch and 10′ yellow neoprene power cord. (PDC versions use a thumb switch) The sealed electrical connection box has a 2″ X 4.5″ flat base allowing the coil to stand in a vertical position. The coils are designed for a 50% duty cycle and are equipped with thermal overload protection. Both the PL-8 and PL-10 operate from a standard 115VAC, 60Hz power source, but may also be operated from a 12V battery. 230VAC coils are also available. (PL-8S and PL-10S)

PL-8PDC and PL-10PDC (pulsed DC) operate from a standard 115VAC input, but produce a powerful pulsed DC magnetic field.

OPERATION:

Plug the power cord of the coil into the appropriateoutlet. Depress the foot switch. A definite magnetic pull will be felt by insertion of a ferrous metal object into the center of the coil. Inspection is accomplished by placing the part longitudinally parallel to the axis of the coil, within the center of the coil nearer to the outer circumference. Activate the foot switch and apply the inspection medium while the coil is energized. This is referred to as the continuous method and will reveal defects at right angles to the coil axis.

When using the wet method, allow the coil to remain energized for approximately two seconds after applying the wet medium. Remove the part for inspection.

To demagnetize a part after inspection, simply place the part within the coil near the outer circumference. While the coil is energized, remove or pull the part approximately two feet away from the coil before turning the coil off. Larger parts may be demagnetized by placing the coil directly over the part and withdrawing the coil in the same manner.

The post PL-8 and PL-10 Magnetizing Coils appeared first on Ndt Instruments.

The B-310 Contour Probe is a lightweight (6 lbs.) Magnetic Inspection Yoke designed to perform magnetic particle inspections quickly and reliably, and with greater versatility.
The overall length of the unit is only 7.25″.
The B-310 Mini Contour Probe provides great flexibility and reduced size.

– Units are available in 115, 230, 42-48 VAC and 4-12 VDC
– All units may be CE certified
– When required, the B-310 may be operated from the optional DC-300 pulsed DC power supply to provide intense DC magnetic fields
– One year repair/replacement guarantee

The reversible strain-relief feature allows the power cord to enter from the rear or top of the unit permitting greater access to small work areas.

As with all Parker Contour Probes, the B-310 has fully adjustable legs permitting the AC magnetic field to be applied to the precise area of inspection.

Specifications:

The post B-310 Series Mini Contour Probes appeared first on Ndt Instruments.

As with the other Parker probes, the B-300 has fully adjustable legs which allow the strong AC field to be applied directly to the precise area to be inspected, regardless of part size or mass.

• Versatility and powerful performance in a lightweight instrument
• Constant AC or pulsed DC fields with the flip of a switch for the location of surface and some sub-surface defects
• Apply continuous or residual magnetic fields and demagnetize too
• Use with dry powder, wet fluorescent or visible
• High impact molded housing
• One year repair/replacement guarantee

 Specifications

The post B-300 Series Contour Probes appeared first on Ndt Instruments.

The post B-300UF Contour Probe appeared first on Ndt Instruments.

The Instrument that does so much, so well.
If you do any work with ferrous metals… in the shipyard, aerospace, steel mill, foundry, weldment or vehicle overhaul… you need the performance advantage of the B-100 Contour Probe.

Wide versatility
Mechanically, the B-100 Probe will conform to practically any surface configuration. Strong, constant AC fields or high intensity pulsed DC fields, using the DC-300 power supply.

One-Person Package
The B-100 Contour Probe is a complete magnetic package. One person takes it to work and easily performs a thorough and reliable inspection in a fraction of the time consumed by large bulky equipment.

Precise Area Inspection
Powerful magnetic fields are concentrated and applied to the precise area to be inspected. The construction of the new B-100 Contour Probe allows for the replacement of all internal components.

DC-300 OPTIONAL PULSED DC POWER SUPPLY

DC-300 (115 VAC, 50/60 Hz Input)
DC-300S (230 VAC, 50/60 Hz Input)

The DC-300 contains an electronic circuit board assembly completely sealed within the housing. The B-100 Probe should be connected to the output power cord, while the input plug of the power supply should be connected to a grounded power source.

SPECIFICATIONS

The post B-100 Contour Probe appeared first on Ndt Instruments.