As with all ECO line systems, the ECO C. has a favorable cost-benefit ratio due to its standardization, but the X-ray source and detectors are still configurable. An easy and fast installation is ensured due to the compact design that includes forklift pockets.

As soon as the system arrives, the operator can start to inspect because the training requirements are low, and the software is user-friendly.

The post ECO C.320 appeared first on Ndt Instruments.

As with all ECO line systems, the ECO C. has a favorable cost-benefit ratio due to its standardization, but the X-ray source and detectors are still configurable. An easy and fast installation is ensured due to the compact design that includes forklift pockets.

As soon as the system arrives, the operator can start to inspect because the training requirements are low, and the software is user-friendly.

The post ECO C.225 appeared first on Ndt Instruments.

The post BARPROOF appeared first on Ndt Instruments.

The OFK-500A OPTIMAX Multi-Lite LED forensic light source field kit is a comprehensive, cost-effective inspection tool. It features a rugged, cordless, battery-operated, rechargeable black-anodized flashlight body with Qwik-Connect interchangeable LED head assemblies of different wavelengths: UV-A (365nm), blue (450nm) and cyan (500nm). The individual colors (wavelengths) aid in forensic inspections of potential evidence found at crime scenes, such as biological stains, latent fingerprints, bruises, bite marks, hair, fibers, grease, oil and other natural stains. Additionally, the lights are used for viewing dye-stained samples.

The post OFK-500A OPTIMAX™ Multi-Lite™ appeared first on Ndt Instruments.

The post OFK-800A OPTIMAX™ Multi-Lite™ appeared first on Ndt Instruments.

Magnetized components can lead to interference signals during crack or microstructure testing with eddy current component conditions, therefore resulting in false readings.

To avoid this, FOERSTER offer a powerful demagnetization unit: the ZMAG CM. The pulse method used enables high penetration depth to demagnetize the components effectively and promptly. The Siemens control and pre-configuration allows an easy integration of the unit into your production process. Thus, your process quality and reliability can be significantly increased.

The post ZMAG CM appeared first on Ndt Instruments.

The post MAGNETOMAT 1.790 appeared first on Ndt Instruments.

Comprehensive ultrasonic quality inspection in the production process

PLATEPROOF enables high-performance, non-destructive testing of your plates via ultrasound. It combines modern ultrasonic electronics – to detect flaws in the test material – with a robust and maintenance-friendly system design.

Everything about the system is made to withstand the harsh operating conditions that are typical of rolling mills.

Advantages at a glance

• ◘ High system availability – through the use of proven and robust modules with powerful modern components
• ◘ Testing in a single test run – through individual adaptation to the specific plate dimensions, whether operated inline or offline
• ◘ High test volume – due to fast test cycles for each plate. The short cycle times are achieved through an optimized control sequence using the latest Siemens control technology
• ◘ Highly sensitive flaw detection with good reproducibility – thanks to modern ultrasonic electronics
• ◘ Automatic quality assessment of the plates, as well as logging by the evaluation software, according to official or individually defined test standards
• ◘ Re-evaluation of plates – based on stored test data

The post PLATEPROOF appeared first on Ndt Instruments.

Eddy Current Testing with Sensor Arrays

Your advantages at a glance

•  Large-area testing: Testing with up to 512 probe elements in parallel
•  Easy to use: Automatic detection of probes and setting of all relevant hardware parameters
•  Localization of inconsistencies: Spatially resolved eddy current data for position-accurate fault detection
•  100% Documentation: Eddy current images can be saved as PNG

The post ECA TCM appeared first on Ndt Instruments.

Precise and reliable conductivity measurement

Your advantages at a glance

Wide Frequency Range: Enables the measurement of different material thicknesses
Shielded probes: These are used to avoid edge effects
Reduced wear: The durable probes with titanium protection were specially designed for this purpose
Easy to use: Automatic detection of probes and loading of calibration curves

The post SIGMATEST TCM appeared first on Ndt Instruments.

The meter features excellent ergonomics; lightweight and easy handling, with visual, audible, and vibration functions. Each meter includes an additional battery cover with belt clip to make it wearable, freeing the user’s hands to focus on their primary job.

With both Warning and Alarm levels users can know when they are approaching their limit without constantly monitoring their device and can act accordingly.

To extend the capabilities of the instrument, a wide variety of external Smart probes are available to meet user needs with any RDS-32 version. GMP-12/GMP-25 probes, and the full CSP probe range can be connected to all RDS-32 versions with adequate cable. The selection includes probes for gamma and neutron dose rate and alpha and/or beta contamination with various detection areas and scaler counting.

Features

• H*(10) dose equivalent rate according to latest standards
• External alpha, beta, gamma and neutron probes for
direct connection
• RDS-32WR for wider dose rate range
• iTx versions for wireless monitoring
• 4-way navigation keys, practical shortcuts
• Intuitive user interface
• Large graphic screen, configurable backlight
• Automatic display rotation with tilt sensor
• High impact durable case construction,
IP67 immersion proof
• Internal memory allows versatile histogram functions and
the ability to manually store measurements
• Configuration and firmware upgrade done through the
CSW-32 Software with USB cable-link
• Complies with IEC 60846 standards, designed to meet
ANSI 42.17A, 42.17C standards

The post RDS-32 Radiation Survey Meter appeared first on Ndt Instruments.

The MAGNATEST TCL is designed to carry out fully automated, non-destructive eddy current testing for 100% inspection in series production. In addition, it can be used for manual testing, e.g. in a laboratory for quality assurance. The MAGNATEST TCL test system consists of the test channel line (TCL) and a PC with testing software. For automated inspection, FOERSTER offers an industrial PC equipped with an interface module.

All the constituent parts of the MAGNATEST TCL can be installed in an equipment cabinet. Alternatively, its compact design allows installation directly in the line. This significantly shortens the cable lengths required between the sensor system and the test channel and minimizes negative impacts on the test quality. The modern software of the TCL test system is intuitive and optimized for touch operation. Embedded help screens are always available if questions come up. In addition, there is a wizard to support you in setting up the test parameters, but it is not mandatory to use it.

In addition to a wide frequency range (4 Hz to 20 MHz), the MAGNATEST TCL features fundamental and harmonic evaluation. The test can be triggered manually, externally by the PLC, or automatically (internally). Password protection prevents outside intervention in the test.In test mode, the results are displayed in the impedance plane and as a bar graph. Afterwards, the report function facilitates comprehensive documentation.

Your advantages at a glance
• Magneto – inductive testing with fundamental and harmonic evaluation: broad frequency ranges from 4Hz to 20 MHz, continuously adjustable in 1 Hz steps
• 100 % control using non-destructive testing method: ideal for all eddy current testing requirements
• State-of-the-art software with intuitive user interface: support functions (wizard) ensure easy operation during parameterization
• Improved test quality: short cable runs between the MAGNATEST TCL and the sensor system minimize interference
• Innovative probe recognition: data chip automatically recognizes the probe, directly loading its settings
• Easy automation and line integration via I/O interface

The post MAGNATEST TCL appeared first on Ndt Instruments.